Xpo.2

Key features:

• Enables high-end stereoscopic 3D visualization

• using standard LCD/DLP projectors

• Built-in sync converter – platform independent

• Supports all stereo formats

• RS 232 controllable

• Supports resolution up to 1400 x 1050

• Programmable custom modes

• OSD menu

• Digital soft edge blending

• Firmware upgradeable

Download xpo.2 brochure here!

Active to passive stereo 3D converter

Patented as the first truly digital stereo 3D converter in the world, it closes the loop in providing a full digital path for the frame sequential stereo signal. As a result, the xpo.2 together with the latest in LCD and DLP projectors make a great tool for passive stereo 3D.

The xpo.2 is platform independent and has built-in automatic source detection. If you are alternating between sources, they will recognise the source in use and remember the optimal settings for it. As the xpo.2 works independently of both source and projectors, they are compatible with the standard stereo signal of any computer and can be applied with any projector type regardless of brand (including CRTs).

The flexibility of the xpo.2 allows for seamless edge blending in stereo 3D. It is therefore a crucial component in all CYVIZ multi-channel solutions. Control software is included at no extra cost – as is firmware upgrades. 

Specifications:

Dimensions:

• Size: 67 x 212 x 242 mm (2.6” x 8.3” x 9.5”)

• Weight: approx. 1,5 kg (3.3 lbs)

Resolutions:

• xpo.2: 640 x 480 to 1400 x 1050

Functions:

• RS-232 control

• Supports control of up to 255 converters from the

• same RS-232 port

• Single mode, sets one of the output

• channels in black

• Manual control of stereo sync

• Programmable custom modes

• OSD-menu

• Digital soft edge blending

Compatibility:

• HV (separate sync)

• CS (composite sync)

• SOG (sync on green)

• PC, SUN, SGI, HP and other workstations

• with frame sequential stereo signal

• Vertical scan: 60 – 120 Hz

• Horizontal scan: 15 – 110 KHz

Inputs:

• Power 15 – 25 VDC, 20W

• VGA 15-pin DSUB female

• 3-pin mini DIN stereo sync connector

• RJ45 port with RS-232 and RS-485 control

• RJ45 chain RS-485 control

Outputs:

• 2 x VGA 15 pin DSUB female, left and right channel

• 2 x digital DVI, left and right channel

• 1 x VGA 15-pin DSUB female, monitor redraw

Supplied material:

• Power adapter 100/240 VAC -19 VDC 2.36A

• RGB computer cable (15 pin DSUB male/male)

• Serial RS-232 cable, RJ45 to 9-pin DSUB female

• Stereo sync cable, 3-pin mini DIN to 3-pin mini DIN

• 10 pair of polarised glasses

• 1 pair of polarised filters, 127 x 102 mm (5”x4”)

• Filter stand

• User guide